Versita

Central European Journal of Engineering

Read Buy print
central-european-journal-of-engineering
Central European Journal of Engineering
  • ISSN:1896-1541
  • eISSN:2081-9927
  • Publisher:Versita, co-published with Springer Verlag
  • Scope:all areas of engineering
  • Owner:Versita
  • Distributor:Springer Verlag

view larger cover read flyer[pdf]

Aims and Scope

Central European Journal of Engineering (CEJE) publishes research results of wide interest in emerging interdisciplinary engineering, as well as traditional engineering fields, including:

  • electrical and computer engineering,
  • civil and environmental engineering,
  • mechanical and aerospace engineering,
  • material science and engineering.

The CEJE is designed to facilitate the exchange of innovative and interdisciplinary ideas between researchers from different countries. The CEJE is peer-reviewed and the language of the CEJE is English. Researchers from non-English regions are provided with free language correction service from native English scientists. Additionally, each published article is widely promoted to researchers working in the same field.
The CEJE is published quarterly in electronic-only version.

Why subscribe and read

  • premier source of high quality engineering research, focused on innovation, changes and future directions of engineering;
  • source of the latest news, achievements and research inspirations in emerging interdisciplinary engineering, as well as traditional engineering fields, including: electrical and computer engineering, civil and environmental engineering, mechanical and aerospace engineering, material science and engineering;
  • international forum for the dissemination of research data with the emphasis on broad and cross disciplinary works from various areas of engineering, designed to facilitate the exchange of innovative and interdisciplinary ideas between researchers from different countries;
  • excellent articles authored by researchers from all over the world, who appreciate our fast, fair and constructive peer review provided by experts in all fields of engineering.

Why submit

  • transparent, comprehensive and fast peer review;
  • possibility of adding animations and stereo images to make your paper more attractive to the readers;
  • free language assistance for authors from non-English speaking regions;
  • efficient route to fast-track publication, possibility of publication on-line in a form of “On Line First” articles before their publication in the issue;

We would like to bring attention of our Readers to the contents of our issue 3(2) which is now available online at the Springerlink

 

Call for Special Issue devoted to Chemical Engineering has been extended till 15 July 2013
Call for Special Issue: AMMA2013 has been extended till 15. July 2013.

Why publish with Versita?

  • every author receives fast, fair and constructive peer-review and publishing service,
  • authors from non-English speaking regions, if necessary, receive extra assistance: we improve English language, structure and technical format of their accepted manuscripts,
  • electronic submission and evaluation system to promote a rapid turnaround in manuscript processing and tracking from production to publication online,
  • no publication charges,
  • free pdf reprints for all corresponding authors,
  • extensive promotion of every published article to hundreds of researchers working in the same field,
  • modern publishing service and high-quality electronic publication technologies,
  • professional marketing services through Springer; global distribution and accessibility via the thousands of libraries already accessing SpringerLink.

Editorial Manager

Manuscripts should be submitted to CEJE via online submission system Editorial Manager available for this journal at http://www.editorialmanager.com/ceje/ . Authors should register themselves first as new users and then upload their manuscripts. Here you may find useful manual for authors.
In case of any technical problems, please contact the Managing Editor of Central European Journal of Engineering (Dr. Anna Kowalska: akowalska@versita.com).

Transfer of Copyright Agreement

Submission of a manuscript indicates a tacit understanding that the paper is not actively under consideration for publication with other journals. Once the paper is accepted, authors are assumed to have transferred the copyright of the paper to the publisher, Versita. After submission authors are asked to email a scanned copy of the signed original to the Managing Editor of the journal.

Transfer of Copyright Agreement

Resources

Editorial Policy
Instructions for Authors
Publication Formats
Reference guide 
Authors Template 

Your contribution

We greatly appreciate the time and effort given by reviewers in evaluating papers for publication in our journal. Thanks to your contribution, Central European Journal of Engineering authors receive fast, fair and comprehensive review.

Our standards

  • our reviewers are kindly requested to deliver reports in 3 weeks
  • research articles and communications are reviewed by a minimum of two reviewers, review papers and vision papers by at least three
  • we pay special attention to receive unbiased, fair opinions; special policies govern allocation of reviewers to articles
  • whenever submission qualifies for publication but needs revision, reviewers are asked to give comprehensive opinion on necessary improvements

Peer review guidelines

Please read these guidelines carefully before you report on any article.

Tools

We encourage reviewers to use our online submission system Editorial Manager. You may log in at http://www.editorialmanager.com/ceje/ . The system manual for referees is available on the Editorial Manager page. If using the online system is not convenient for you, please contact the Editor by email.

Welcome

If you wish to support us as a reviewer, please contact the Managing Editor at akowalska@versita.com .

Chemical Abstracts Service (CAS), Google Scholar, OCLC, Summon by Serial Solutions, SCOPUS

Editor-in-Chief

Ahmed K. Noor, Old Dominion University, USA

 

Managing Editor

Anna Kowalska, Wroclaw University of Technology, Poland

 

Editorial Advisory Board

Alireza Bahadori, Southern Cross University, Australia
Shyi-Ming Chen, National Taichung University of Education,Taiwan
Ayhan Demirbas, Sirnak University, Sirnak, Turkey
Earl Dowell, Duke University, USA
José M.F. Ferreira, University of Aveiro, Portugal
Georgios B. Giannakis, University of Minnesota, USA
Alexander Guz, National Academy of Sciences of Ukraine, Ukraine
Tasawar Hayat, Quaid-i-Azam University, Pakistan
Hanafi Ismail, University of Sains Malaysia
Thiagalingam Kirubarajan, McMaster University, Canada
Yuri Kivshar, Australian National University, Canberra, Australia
Miroslav Krstic, University of California, San Diego, USA
James Lam, University of Hong Kong, China
Heng Li, Hong Kong Polytechnic University, China
Krzysztof Matyjaszewski, Carnegie Mellon University, USA
Dimitri Mavris, Georgia Institute of Technology, Atlanta, USA
Tatsuki Ohji, National Institute of Advanced Industrial Science and Technology (AIST), Japan
Donal O'Regan, National University of Ireland, Galway, Ireland
Peng Shi, Victoria University, Australia
Vijay P. Singh, Texas A and M University, USA
Mustafa Soylak, Erciyes University, Turkey
Firdaus Udwadia, University of Southern California, USA
Kimon P. Valavanis, University of Denver, USA
Abdul-Majid Wazwaz, Department  of Mathematics, Saint Xavier University, Chicago, USA
Thomas J. Webster, Brown University, USA
S.C. Wong, Univeristy of Hong Kong, China
Jiashi Yang, University of Nebraska-Lincoln, USA
Jia Jane You, Hong Kong Polytechnic University, China
Jie Zhang, Newcastle University, United Kingdom
Yong Zhang, National University of Singapore, Singapore

 

Editors

ELECTRICAL & COMPUTER ENGINEERING 

Applied Mathematics
Anjan Biswas, Delaware State University, Dover, USA
Hsiang-Chuan Liu, Department of Biomedical informatics, Asia University, Taiwan
George A. Gravvanis, Department of Electrical and Computer Engineering, Democritus University of Thrace, Greece
George Halikias, School of Engineering and Mathematical Sciences, City University, UK

Artificial Intelligence
Valentina E. Balas, Department of Automation and Applied Informatics, Aurel Vlaicu University of Arad, Romania
Jason J. Jung, Department of Computer Engineering, Yeungnam University, Republic of Korea
Hairi Zamzuri, UTM-Proton Active Safety Research Laboratory, Technical University, Malaysia

Hardware & Architecture
Julius Žilinskas, Institute of Mathematics and Informatics, Vilnius University, Lithuania

Software Engineering 
Jason J. Jung, Department of Computer Engineering, Yeungnam University, Republic of Korea

Computer Systems Organization & Communication Networks
Jordi Mognay Batalla, Warsaw University of Technology/ National Institute of Telecommunications, Poland
Peter Brida, University of Zilina, FEE, Department of Telecommunications and Multimedia, Slovakia
Christian Callegari, Department of Information Engineering, University of Pisa
Danielo G. Gomes, Department of Teleinformatics Engineering, Federal University of Ceara, Brazil
Wojciech Mazurczyk, Warsaw University of Technology, Faculty of Electronics and Information Technology Institute of Telecommunications, Poland

Computer Imaging, Vision, Pattern Recognition & Graphics 
Dariusz Frejlichowski, Faculty of Computer Science and Information Technology, West Pomeranian University of Technology, Poland
Bor-Chen Kuo, Graduate Institute of Educational Measurement and Statistics, National Taichung University of Education, Taiwan

Computer Applications
Wojciech Mazurczyk, Warsaw University of Technology, Faculty of Electronics and Information Technology Institute of Telecommunications, Poland
Filippo A. Salustri, Department of Mechanical and Industrial Engineering, Ryerson University, Canada

Data Structures, Cryptology & Information Theory
Wojciech Mazurczyk, Warsaw University of Technology, Faculty of Electronics and Information Technology Institute of Telecommunications, Poland

Automation & Control Systems
Valentina E. Balas, Department of Automation and Applied Informatics, Aurel Vlaicu University of Arad, Romania
George Halikias, School of Engineering and Mathematical Sciences, City University, UK
Hamid Reza Karimi, Department of Engineering, University of Agder, Norway
Zhang Lixian, Space Control and Inertial Technology Research Center, Harbin Institute of Technology, Harbin, China
Argyrios Zolotas, School of Engineering and Informatics, University of Sussex, Falmer, Brighton, UK 

Cybernetics
Joakim Holmberg, Division of Mechanics, Linköping University, Sweden

Information System & Telecommunication
Jordi Mognay Batalla, Warsaw University of Technology/ National Institute of Telecommunications, Poland
Peter Brida, University of Zilina, FEE, Department of Telecommunications and Multimedia, Slovakia
Christian Callegari, Department of Information Engineering, University of Pisa
Tomasz Długosz, Wroclaw University of Technology, Institute of Telecommunications, Teleinformatics and Acoustics, Poland
Wojciech Mazurczyk, Warsaw University of Technology, Faculty of Electronics and Information Technology Institute of Telecommunications, Poland

Remote Sensing
Bor-Chen Kuo, Graduate Institute of Educational Measurement and Statistics, National Taichung University of Education, Taiwan
Danielo G. Gomes, Department of Teleinformatics Engineering, Federal University of Ceara, Brazil

Electromagnetics
Tomasz Długosz, Wroclaw University of Technology, Institute of Telecommunications, Teleinformatics and Acoustics, Poland
Habib Rahman, Department of Electrical and Computer Engineering, Saint Louis University, USA

Power Systems, Power Engineering
Zeljko Tomsic, University of Zagreb, Faculty of Electrical Engineering and Computing, Department of Power Systems, Republic of Croatia
Athanasios Karlis, Electrical & Computer Engineering, Democritus University of Thrace, Greece

Power Electronics, Electrical Machines, Drives & Networks
Miron – Jean Cristea, Department of Electronic Devices and Circuts, Politehnika University of Bucharest, Romania
Athanasios Karlis, Electrical & Computer Engineering, Democritus University of Thrace, Greece
Ibrahim Al-Bahadly, School of Engineering and Advanced Technology, Massey University, Palmerston North, New Zealand

Electrical Machines and Drives
Arash Hassanpour Isfahani, Renewable Energy and Vehicular Technology Laboratory, University of Texas at Dallas, Richardson, USA

Electronics and Microelectronics, Instrumentation
Miron – Jean Cristea, Department of Electronic Devices and Circuts, Politehnika University of Bucharest, Romania

Electronic Materials and Devices
Miron – Jean Cristea, Department of Electronic Devices and Circuts, Politehnika University of Bucharest, Romania

Nanotechnology &  Microengineering 
Florin Babarada, University Politehnica of Bucharest, Faculty of Electronics Telecommunications & Information Technology, Romania
Amit Chaudhry, University Institute of Engineering and Technology, Panjab University, Chandigarh, India
Val R. Marinov, Department of Industrial & Manufacturing Engineering, North Dakota State University, Fargo, North Dakota, USA
Cheuk-Wai Tai, Department of Materials and Environmental Chemistry, Stockholm University, Sweden
Jiandi Wan, Department of Mechanical and Aerospace Engineering, Princeton University, USA

Control, Robotics, Mechatronics
George Halikias, School of Engineering and Mathematical Sciences, City University, UK
Hamid Reza Karimi, Department of Engineering, University of Agder, Norway
Xiu-Tian Yan, Department of Design, Manufacture and Engineering Management, University of Strathclyde, UK

CIVIL & ENVIRONMENTAL ENGINEERING

HVAC Systems
Constantinos Balaras, Research Director Group Energy Conservation (GREC), Institute for Environmental Research & Sustainable Development (IERSD); National Observatory of Athens (NOA), Greece
Harjit Singh,  School of Engineering and Design, Brunel University, UK

Construction & Building Technology
Humberto Varum, Unviersity of Aveiro, Campus Universitario de Santiago, Civil Engineering Department, Aveiro, Portugal
Jitka Mohelnikowá, Brno University of Technology, Faculty of Civil Engineering, Czech Republic
Margarita M. Natova, Institute of Mechanics of Bulgarian Academy of Sciences, Bulgaria
Velu Saraswathy, Central Electrochemical Research Institute, India
Alexandros-Dimitrios G. Tsonos, Department of Civil Engineering, School of Engineering, Aristotle University of Thessaloniki, Greece

Geomatics, Geosensorics, Geodetic Engineering 
Nadhir Al-Ansari, Civil, Environmental and Natural Resources Engineering, Lulea University, Sweden
Ioannis D. Doukas, Civil Engineering, Aristotle University of Thessaloniki, Greece
Humberto Varum, Unviersity of Aveiro, Campus Universitario de Santiago, Civil Engineering Department, Aveiro, Portugal
Amin Barari, Aalborg University, Department of Civil Engineering, Aalborg, Denmark
Maja Todorovic, Univeristy Singidunum, Belgrade, Romania

Offshore Engineering
R.M. Chandima Ratnayake, Department of Mechanical and Structural Engineering and Materials Science (IKM), Faculty of Science & Technology, University of Stavanger, Norway
Amin Barari, Aalborg University, Department of Civil Engineering, Aalborg, Denmark
Alireza Bahadori, Southern Cross University, Australia

Energy & Environment
Constantinos Balaras, Research Director Group Energy Conservation (GREC), Institute for Environmental Research & Sustainable Development (IERSD); National Observatory of Athens (NOA), Greece
Christian Ghiaus, INSA Lyon, France
Carol S.K.Lin, School of Energy and Environment, City University of Hong Kong, Hong Kong
Jitka Mohelnikowá, Brno University of Technology, Faculty of Civil Engineering, Czech Republic
Zeljko Tomsic, University of Zagreb, Faculty of Electrical Engineering and Computing, Department of Power Systems, Republic of Croatia

Environmental Engineering 
Maja Todorovic, Univeristy Singidunum, Belgrade, Romania
Constantinos Balaras, Research Director Group Energy Conservation (GREC), Institute for Environmental Research & Sustainable Development (IERSD); National Observatory of Athens (NOA), Greece
Fratila Dominita-Florina, Technical University of Cluj-Napoca, Department of Manufacturing Engineering, Romania
Veera Gnaneswar Gude, Department of Civil Engineering, Oregon Institute of Technology, USA
Matjaz Mikoš, Dean of the Faculty of Civil and Geodetic Engineering, University of Ljubljana, Slovenia
Peter Robertson , Vice-Principal’s Office, Robert Gordon UniversityRobert Gordon University, UK
Nadhir Al-Ansari, Civil, Environmental and Natural Resources Engineering, Lulea University, Sweden

Energy & Buildings 
João C.G. Lanzinha, Department of Civil Engineering and Architecture, University of Beira Interior, Portugal
Harjit Singh, School of Engineering and Design, Brunel University, UK
Constantinos Balaras, Research Director Group Energy Conservation (GREC), Institute for Environmental Research & Sustainable Development (IERSD); National Observatory of Athens (NOA), Greece
Zeljko Tomsic, University of Zagreb, Faculty of Electrical Engineering and Computing, Department of Power Systems, Republic of Croatia
Jitka Mohelnikowá, Brno University of Technology, Faculty of Civil Engineering, Czech Republic
Christian Ghiaus, INSA Lyon, France

Chemical & Petroleum Engineering
Alireza Bahadori, Southern Cross University, Australia
Wei-Yin Chen, Department of Chemical Engineering, University of Mississippi, USA
Sachin Kumar, Sustainable Energy Systems Research (SES), Bourns College of Engineering, Center for Environmental Research & Technology (CERT), USA
George Z. Kyzas, Department of Petroleum and Natural Gas Technology, Technological Educational Institute of Kavala, Greece
Peter Robertson , Vice-Principal’s Office, Robert Gordon UniversityRobert Gordon University, UK

Hydraulic Engineering
Nadhir Al-Ansari, Civil, Environmental and Natural Resources Engineering, Lulea University, Sweden
Matjaz Mikoš, Dean of the Faculty of Civil and Geodetic Engineering, University of Ljubljana, Slovenia
Clemens Neuhold, Institute of Water Management, Hydrology and Hydraulic Engineering, University of Natural Resources and Life Sciences, Vienna, Austria

Manufacturing Engineering
Fratila Dominita-Florina, Technical University of Cluj-Napoca, Department of Manufacturing Engineering, Romania
J. Paulo Davim, Department of Mechanical Engineering, University of Aveiro, Portugal

Natural, Man-made Disasters & Their Management
Ioannis D. Doukas, Civil Engineering, Aristotle University of Thessaloniki, Greece
Veera Gnaneswar Gude, Department of Civil Engineering, Oregon Institute of Technology, USA

Sustainable Development
Constantinos Balaras, Research Director Group Energy Conservation (GREC), Institute for Environmental Research & Sustainable Development (IERSD); National Observatory of Athens (NOA), Greece
Veera Gnaneswar Gude, Department of Civil Engineering, Oregon Institute of Technology, USA
R.M. Chandima Ratnayake, Department of Mechanical and Structural Engineering and Materials Science (IKM), Faculty of Science & Technology, University of Stavanger, Norway

Transportation Science & Technology
Silvino Dias Capitão, Department of Civil Engineering, Polytechnic Institute of Coimbra, Portugal
Stavri Dimitrov, Department of Technology, Organization and Management of Transport, Higher School of Transport “Todor Kableshkov”, Sofia, Bulgaria
Kosta Kostov, Higher School of Transport, Sofia, Department „Road  and  Railroad  Building”, Bulgaria
Krasimir T. Krastanov, Material Handling and Construction Machines and Systems Department, Todor Kableshkov University of Transport, Bulgaria
Valdas Lukauskas, Shipping Department, Klaipeda University, Lithuania
Wai Yuen Szeto, Department of Civil Engineering, University of Hong Kong, Hong Kong
Bogdan Varga, Technical University of Cluj-Napoca, Faculty of Mechanics, Romania

Waste Management & Waste Technology
Ruben Miranda Carreño, Chemical Engineering, Complutense University of Madrid

MECHANICAL & AEROSPACE ENGINEERING 

Aerospace Engineering
José C. Páscoa, Head Lic. Electromechanical Engineering Laison Office at Nuclear Agency – OCDE, Univeristy of Beira Interior, CAST – Center for Aerospace Science and Technology, Portugal
Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK

Astrodynamics
Anna Guerman, CAST – Centre for Aerospace Science and Technologies, University of Beira Interior, Portugal

Bioengineering and Biomechanics
Hamed Hatami-Marbini, Department of Mechanical & Aerospace Engineering, Oklahoma State University, USA
Joakim Holmberg, Division of Mechanics, Linköping University, Sweden
Rob Krams, Department of Bioengineering, Imperial College London, UK

Energy & Fuels
Christian Ghiaus, INSA Lyon, France
Florin Mariasiu,The Technical University of Cluj-Napoca, Faculty of Mechanic, ARMA Department,Romania
Jinliang Yuan, Energy Sciences, Lund University, Sweden

Renewable & Green Energy
Veera Gnaneswar Gude, Department of Civil Engineering, Oregon Institute of Technology, USA
Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK
Carol S.K.Lin, School of Energy and Environment, City University of Hong Kong, Hong Kong
Zhang Qichun, School of Materials Science and Engineering, Nanyang Technological University, Singapur
Harjit Singh, School of Engineering and Design, Brunel University, UK
Zeljko Tomsic, University of Zagreb, Faculty of Electrical Engineering and Computing, Department of Power Systems, Republic of Croatia
Athanasios Karlis, Electrical & Computer Engineering, Democritus University of Thrace, Greece
Zhichuan Xu, Department of Mechanical Engineering, Massachusetts Institute of Technology, USA

Nuclear Engineering
Mohamed Eid, DM2S/SERMA, CAE/DEN, France
Marek Flaska, Department of Nuclear Engineering and Radiological Sciences, University of Michigan, USA

Mechanical Engineering
José C. Páscoa, Head Lic. Electromechanical Engineering Laison Office at Nuclear Agency – OCDE, Univeristy of Beira Interior, CAST – Center for Aerospace Science and Technology, Portugal
Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK

Engineering Thermodynamics, Heat & Mass Transfer
Abdul Aziz, School of Engineering and Applied Science, Gonzaga University, WA, USA
Chien-Pin Chen, Chemical and Materials Engineering, University of Alabama, USA
Chang Yi Kong, Department of Materials Science and Chemical Engineering, Faculty of Engineering, Shizuoka University, Japan
Giulio Lorenzini, Department of Industrial Engineering, University of Parma, Italy
Cressault Yann, Paul Sabatier University, LAPLACE laboratory, Laboratory of Plasma and Conversion of Energy, France

Engineering Design
Filippo A. Salustri, Department of Mechanical and Industrial Engineering, Ryerson University, Canada

Automotive Engineering 
Simon M. Barrans, Department of Engineering and Technology, University of Huddersfield, UK
Mohamed E. M. El-Sayed, Department of Mechanical Engineering, Kettering University, USA
Florin Mariasiu,The Technical University of Cluj-Napoca, Faculty of Mechanic, ARMA Department,Romania
Bogdan Varga, Technical University of Cluj-Napoca, Faculty of Mechanics, Romania

Industrial Engineering 
Fratila Dominita-Florina, Technical University of Cluj-Napoca, Department of Manufacturing Engineering, Romania
Waldemar Karwowski, Department of Industrial Engineering and Management Systems, University of Central Florida, USA
Giulio Lorenzini, Department of Industrial Engineering, University of Parma, Italy
Viliam Makis, Mechanical and Industrial Engineering, University of Toronto, Canada
R.M. Chandima Ratnayake, Department of Mechanical and Structural Engineering and Materials Science (IKM), Faculty of Science & Technology, University of Stavanger, Norway

Continuum Mechanics & Mechanics of Materials 
Zengtao Chen, Department of Mechanical Engineering, University of New Brunswick, Canada
Joakim Holmberg, Division of Mechanics, Linköping University, Sweden
Jose Merodio, Department of Continuum Mechanics and Theory of Structures, Technical University of Madrid, Spain

Engineering Fluid Dynamics
Chien-Pin Chen, Chemical and Materials Engineering, University of Alabama, USA
Farhad Ein-Mozaffari, Chemical Engineering, Ryerson University, Canada
Antonio Miguel, Department of Physics, University of Evora, Portugal
Anderson H.C. Shum, Department of Mechanical Engineering, University of Hong Kong, Hong Kong
Jiandi Wan, Department of Mechanical and Aerospace Engineering, Princeton University, USA

Vibration, Dynamical Systems, Control
Hua-Peng Chen, Department of Engineering, Greenwich University, UK
Jinchen Ji, School of Electrical, Mechanical and Mechatronic Systems, Faculty of Engineering and IT, University of Technology, Sydney, Australia

Theoretical and Applied Mechanics
Hamid Akbarzadeh, Mechanical Engineering Department, University of New Brunswick, Fredericton, NB, Canada

MATERIAL SCIENCE & ENGINEERING

Biomaterials 
Csaba Balázsi, Head of the Ceramics and Nancomposites Department, Institute of Mechanical Engineering, University of Pannonia, Hungry
Narayan Bhattarai, Department of Chemical and Bioengineering, North Carolina A&T State University, USA
Dhiman Bhattacharyya, Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
Barbara Codan, Industrial and Information Engineering, University of Trieste, Italy
Anderson H.C. Shum, Department of Mechanical Engineering, University of Hong Kong, Hong Kong
Hongjun Wang, Chemistry, Chemical Biology and Biomedical Engineering, Stevens Institute of Technology, USA

Ceramics, Glass, Natural Materials 
Csaba Balázsi, Head of the Ceramics and Nancomposites Department, Institute of Mechanical Engineering, University of Pannonia, Hungry
Narayan Bhattarai, Department of Chemical and Bioengineering, North Carolina A&T State University, USA
Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK
Haitao Huang, Department of Applied Physics, Hong Kong Polytechnic University, Hong Kong
Hongjun Wang, Chemistry, Chemical Biology and Biomedical Engineering, Stevens Institute of Technology, USA

Coatings and Films, Corrosion, Tribology 
Orlin Iliev Angelov, Central laboratory of solar energy and new energy sources - Bulgarian Academy of Sciences, Bulgaria
Dhiman Bhattacharyya, Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
J. Paulo Davim, Department of Mechanical Engineering, University of Aveiro, Portugal
Margarita M. Natova, Institute of Mechanics of Bulgarian Academy of Sciences, Bulgaria
Anderson H.C. Shum, Department of Mechanical Engineering, University of Hong Kong, Hong Kong
Velu Saraswathy, Central Electrochemical Research Institute, India
Radostina Konstantinova Stoyanova, Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences

Composite Materials
Csaba Balázsi, Head of the Ceramics and Nancomposites Department, Institute of Mechanical Engineering, University of Pannonia, Hungry
Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK
Haitao Huang, Department of Applied Physics, Hong Kong Polytechnic University, Hong Kong
Margarita M. Natova, Institute of Mechanics of Bulgarian Academy of Sciences, Bulgaria
Zhang Qichun, School of Materials Science and Engineering, Nanyang Technological University, Singapur
Radostina Konstantinova Stoyanova, Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences
Alexandros-Dimitrios G. Tsonos, Department of Civil Engineering, School of Engineering, Aristotle University of Thessaloniki, Greece
J. Paulo Davim, Department of Mechanical Engineering, University of Aveiro, Portugal

Material Characterization & Testing
Orlin Iliev Angelov, Central laboratory of solar energy and new energy sources - Bulgarian Academy of Sciences, Bulgaria
Zengtao Chen, Department of Mechanical Engineering, University of New Brunswick, Canada
Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK
Zhang Qichun, School of Materials Science and Engineering, Nanyang Technological University, Singapur
Radostina Konstantinova Stoyanova, Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences

Materials & Manufacturing Technology
J. Paulo Davim, Department of Mechanical Engineering, University of Aveiro, Portugal
Zengtao Chen, Department of Mechanical Engineering, University of New Brunswick, Canada
Jan Jezierski, Department of Foundry, Silesian University of Technology, Gliwice, Poland
Val R. Marinov, Department of Industrial & Manufacturing Engineering, North Dakota State University, Fargo, North Dakota, USA
R.M. Chandima Ratnayake, Department of Mechanical and Structural Engineering and Materials Science (IKM), Faculty of Science & Technology, University of Stavanger, Norway

Mining & Mineral Processing
Dariusz Oleszak, Faculty of Material Science and Engineering, Warsaw University of Technology, Poland

Metallurgy & Metallurgical Engineering
Robert Bidulsky, Faculty of Metallurgy, Technical University of Kosice, Slovakia
Jan Jezierski, Department of Foundry, Silesian University of Technology, Gliwice, Poland

Nanoscience & Nanotechnology
Csaba Balázsi, Head of the Ceramics and Nancomposites Department, Institute of Mechanical Engineering, University of Pannonia, Hungry
Robert Bidulsky, Faculty of Metallurgy, Technical University of Kosice, Slovakia
Dhiman Bhattacharyya, Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
Haitao Huang, Department of Applied Physics, Hong Kong Polytechnic University, Hong Kong
Cheuk-Wai Tai, Department of Materials and Environmental Chemistry, Stockholm University, Sweden
Orlin Iliev Angelov, Central laboratory of solar energy and new energy sources - Bulgarian Academy of Sciences, Bulgaria
Barbara Codan, Industrial and Information Engineering, University of Trieste, Italy
Zhang Qichun, School of Materials Science and Engineering, Nanyang Technological University, Singapur
Anderson H.C. Shum, Department of Mechanical Engineering, University of Hong Kong, Hong Kong
Jiandi Wan, Department of Mechanical and Aerospace Engineering, Princeton University, USA
Hongjun Wang, Chemistry, Chemical Biology and Biomedical Engineering, Stevens Institute of Technology, USA
Zhichuan Xu, Department of Mechanical Engineering, Massachusetts Institute of Technology, USA

Paper&Wood
Ruben Miranda Carreño, Chemical Engineering, Complutense University of Madrid

Polymer Science
Avinash Baji, School of Aerospace, Mechanical and Mechatronic Engineering (AMME), University of Sydney, Australia
Dhiman Bhattacharyya, Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
Margarita M. Natova, Institute of Mechanics of Bulgarian Academy of Sciences, Bulgaria
Zhang Qichun, School of Materials Science and Engineering, Nanyang Technological University, Singapur
Anderson H.C. Shum, Department of Mechanical Engineering, University of Hong Kong, Hong Kong
Hongjun Wang, Chemistry, Chemical Biology and Biomedical Engineering, Stevens Institute of Technology, USA

Textiles
Radostina A. Angelova, Technical University of Sofia, Department of Textiles, Centre for Research and Design in Human Comfort, Energy and Environment (CERDECEN), Bulgaria
Narayan Bhattarai, Department of Chemical and Bioengineering, North Carolina A&T State University, USA

Associate Editors

Tomasz Cholewa, Lublin University of Technology, Faculty of Environmental Engineering, Poland
Grzegorz Liśkiewicz, Institute of Turbomachinery, Technical Univerisity of Łódź, Poland
George Z. Kyzas, Department of Petroleum and Natural Gas Technology, Technological Educational Institute of Kavala, Greece
Julija Šommet, Mining Department, Tallinn University of Technology, Estonia
Justyna Stefaniak, Faculty of  Environmental Engineering, Lublin University of Technology, Poland
Mehdi Anidsheh-Tadbir,School of Mechanical Engineering, Shiraz University, Iran
Jifeng Wang, Department of Mechanical Science and Engineering, University of Illinois at Urbana Champaign, USA

 

Language Editors

Tomasz Dudziak, Cranfield University, Center for Energy and Resource Technology, United Kingdom
Sarah McCormack, Department of Civil, Structural and Environmental Engineering, Trinity College Dublin, Ireland
Christopher Mannion, Department of Air Engineering and Weapons, Institute of Engineering and Technology, UK
Chikezie Nwaoha, Petroleum and Gas Engineering, Nigeria
Frank Odhiambo, Institute of Development Engineering, Loughborough University, UK
Rafael Santos, Katholieke Universiteit Leuven, Department of Chemical Engineering Laboratory of Applied, Belgium
Piotr Włuka, Department of Strength of Materials and Structures, Technical University of Lodz, Poland

Technical Editor

Agnieszka Brzyska
Magdalena Jankowska

 

Managing Editor 
Anna Kowalska
akowalska@versita.com